Description
WEDGE-CARRIER CAMPING DINNERWARE SET REVIEW
B2B MODULAR CARRY AND PLACE-SETTING CONCEPT
Four-Wedge Round Carrier Camping Dinnerware Set
This wedge carrier camping dinnerware set organizes four personal place settings in four removable caddies that dock inside one round rigid case. Each conceptual wedge contains a conventional plate, bowl, cup, fork and spoon; a central cup may organize shared items. Final construction, dimensions, materials, food-contact evidence, fit, loads, MOQ and lead time are To be confirmed for the project.
- Concept users
- Four people
- Architecture
- Round case with four removable wedge caddies
- Reference content
- 4 plates, 4 bowls, 4 cups, 4 forks and 4 spoons
- Dimensions
- To be confirmed for the project
- Materials
- To be confirmed for the project
- Compatibility
- Compatibility to be confirmed by project sample and drawing.
PRODUCT PARAMETER
Wedge-Carrier Camping Dinnerware Set Specification Record
| Field | Current value | Approval evidence |
|---|---|---|
| Architecture | Round rigid case, four removable wedge caddies and optional central organizer; concept only | Released case, caddy, divider and closure drawings |
| Component count | Four conceptual place settings | Signed BOM with codes and quantities |
| Closed case diameter and height | To be confirmed for the project | Loaded drawing, units and tolerances |
| Wedge caddy envelope | To be confirmed for the project | Caddy drawing and radial clearance stack |
| Dinnerware sizes | To be confirmed for the project | Component drawings and caddy-fit record |
| Materials and colorants | To be confirmed for the project | Component-level material and destination evidence |
| Retention and carry performance | To be confirmed for the project | Buyer-approved conditions and sample review |
| Caddy/component compatibility | Compatibility to be confirmed by project sample and drawing. | Matched revisions and complete-set fit record |
| Logo and packaging | To be confirmed for the project | Artwork and pack-out approval |
| MOQ and lead time | To be confirmed for the project | Project quotation after scope review |
REFERENCE CONFIGURATIONS
Configure the Round Case Around Four Personal Wedges
The radial four-caddy architecture differs from the book-fold panel case, covered lap-tray case and table-edge rail caddy. Compare the wider camping dinnerware program before freezing the BOM.
Four personal wedges
Each caddy groups one place setting. Final caddy count, handle opening and component dividers remain project controlled.
Radial docking
The wedges meet around a center interface. Gap, tolerance, rotation and removal clearance require drawing review.
Round carry case
The loaded caddies fit inside one zip or hard-lid case. Closure method, carry balance and protection need samples.
Table organizer
Each wedge may remain beside one diner; stability, cleanability, edge contact and repacking need buyer approval.
DEVELOPMENT CONTROL
Release the Wedge-Carrier Architecture in Four Steps
- 01
Freeze the component map
Assign codes and revisions to case, lid, four wedges, center organizer and every dinnerware component.
- 02
Control radial fit
Approve wedge angles, center interface, divider walls, handholds, loaded height and closure clearance.
- 03
Review removal and repacking
Check caddy extraction, place-setting access, stability, cleaning, orientation and carry balance.
- 04
Release evidence
Connect materials, intended use, food-contact scope, artwork and packaging to one controlled revision.
MATERIAL AND COMPLIANCE BOUNDARY
Separate Carrier Structure From Food-Contact Dinnerware
The case shell, lid, zipper or closure, wedge caddies, divider walls, handles and center organizer need structural material, edge, cleaning and use-condition review. Plates, bowls, cups and utensils require exact material, colorant, intended food, temperature and contact-duration evidence.
Where relevant, review U.S. plastic food-contact conditions against 21 CFR 177.1520 and EU destination scope against Regulation (EC) No 1935/2004. GS1 General Specifications may inform identification if selected by the buyer. No certification or performance is claimed.
PROCUREMENT FAQ
Questions About the Wedge-Carrier Camping Dinnerware Set
Are the dimensions final?
No. Case, wedge, center organizer, component and carton dimensions are To be confirmed for the project.
Will every component fit each wedge?
Compatibility to be confirmed by project sample and drawing.
Is the center organizer included?
Its function, count and construction are To be confirmed for the project.
How securely do the wedges stay in the case?
No retention performance is claimed. Conditions and acceptance criteria require buyer approval.
Can buyers customize color, logo and packaging?
Yes as project variables, subject to confirmed construction, artwork method, MOQ and lead time.
Is this an existing SKU?
No. It is an AI-generated development concept; tooling, capability and performance remain unverified.
CONTROL RADIAL FIT, CADDY REMOVAL AND CASE CLEARANCE BEFORE QUOTATION
Request a Wedge-Carrier Set Review
Send the component bill, target wedge and case envelopes, intended use conditions, colors, artwork, packaging and destination evidence scope.
RELATED SOURCING PATHS
Compare Products and Plan Your Project
Review related product formats, then compare material, set configuration, logo, packaging, testing scope and order quantity with our B2B team.
