Description
B2B SOURCE-CONTROLLED CONCEPT
Four-Person Table Case Camping Dinnerware Set
This table case camping dinnerware set stores four place settings in a hard carry case whose two shells unfold into a low table. Detachable legs, nested service pieces and molded storage wells create a different component architecture from recent coolers, baskets, backpacks, trays and the six-sided case. The illustrations are development concepts; final construction and fit require approval.
- Reference users
- Four people
- Reference table size
- 580 × 395 × 220 mm
- Reference storage size
- 390 × 300 × 87 mm
- Reference set weight
- 1.2 kg
- Source-listed material
- PP for table and dinnerware
- Project compatibility
- To be confirmed for the project
PRODUCT PARAMETER
Table Case Camping Dinnerware Set Specification Record
The official Captain Stag UT-56 page was accessed on October 30, 2026. Only explicit reference values are recorded. Price, MOQ, lead time, certification and unsupported performance are excluded.
| Field | Source-listed reference | Project approval evidence |
|---|---|---|
| Reference configuration | Table case with fork, spoon, bowl, plate and cup for four people | Signed component bill and count-safe packed sample |
| Table size | 580 × 395 × 220 mm | Project drawing with datums and tolerances |
| Storage size | 390 × 300 × 87 mm | Closed-case drawing including handle and latches |
| Reference set weight | 1.2 kg | Define net set and packed shipping weight separately |
| Reference load limit | 3 kg | Agreed load position, duration, surface and pass/fail rule |
| Fork and spoon | 170 × 35 × 14 mm | Released profile, thickness and measured samples |
| Bowl | Ø115 × 45 mm; 280 ml brimful reference | Usable-capacity method and component drawing |
| Plate | Ø178 × 20 mm; 300 ml brimful reference | Rim profile, usable area and stack-height review |
| Cup | Ø68 × 75 mm; 210 ml brimful reference | Usable capacity, grip and packed-fit review |
| Source-listed material | PP; source lists 120°C heat and −20°C cold reference values | Exact resin, intended conditions and project evidence |
| Color, logo, carton, MOQ and lead time | To be confirmed for the project | Approved quotation, artwork and pack-out revision |
REFERENCE CONFIGURATIONS
Configure the Table Case Camping Dinnerware Set by Module
The table case camping dinnerware set differs from the six-person hex case, coffee service cooler and tray-lid basket. Review the camping dinnerware program before fixing the channel assortment.
Reference four-person service
Control four plates, four bowls, four cups, four forks and four spoons as a countable module linked to one project revision.
Table-shell module
Define hinge opening, tabletop flatness, edge joint, handle position and latch clearance before treating the case as a usable table.
Four-leg module
Specify leg length, socket engagement, retention during transport and intended load. Appearance alone does not establish stability.
Optional lunch-box module
A lunch box may replace selected bowls only after closed-case clearance, table load and component counts are recalculated.
DEVELOPMENT CONTROL
Release the Table Case in Four Linked Steps
- 01
Freeze the component bill
Assign an article code and drawing revision to each dish, utensil, leg, shell, hinge, latch and replacement part.
- 02
Define every interface
Approve stack heights, storage wells, leg clips, sockets, hinge travel, tabletop joint and latch clearance.
- 03
Review a packed sample
Check counts, opening sequence, leg installation, table level, component contact, repacking and carry balance.
- 04
Release matched records
Link drawings, materials, colors, artwork, carton plan and inspection fields to one revision.
MATERIAL AND COMPLIANCE BOUNDARY
Approve the Exact Resin and Intended Conditions
The source lists PP and reference temperature values for its item, but that does not establish the exact resin, colorant, recycled content, intended foods, contact duration, migration evidence, cleaning method or finished construction for this project. Each exact food-contact component and color needs its own record.
For United States projects, consult the FDA Inventory of Food Contact Substances Listed in 21 CFR. For European Union projects, review Regulation (EC) No 1935/2004 and the European Commission food-contact materials overview. No microwave, dishwasher, impact, table-load or outdoor-life performance is claimed for the project.
PROCUREMENT FAQ
Questions About the Table Case Camping Dinnerware Set
Are the listed dimensions final project dimensions?
No. They are official UT-56 reference values. Final orientation, datums and tolerances require the project drawing.
Does the 3 kg value apply to every design?
No. It is a source-listed reference. Project load position, duration, surface, leg geometry and pass/fail criteria must be defined.
Are the capacities usable capacities?
The source identifies full-water capacities. Define a separate usable fill line and measurement method before approving marketing data.
Can bowls be replaced by lunch boxes?
They may be evaluated after stack height, closed-case clearance, table load and count records are recalculated. Compatibility to be confirmed by project sample and drawing.
Are the illustrated molded wells standard?
No. They are a concept option. Final retention, contact marks, wall thickness and tooling scope require review.
Is this cookware?
No. It is dinnerware, flatware and a carry/table case. No stove, flame, boiling or direct-heat claim is made.
CONTROL THE TABLE, LEGS AND PACK-OUT BEFORE QUOTATION
Request a Table Case Camping Dinnerware Set Review
Send the component bill, table and storage envelope, piece profiles, leg and load requirements, colors, artwork, carton plan and evidence scope. Naike Dinner will separate source-backed inputs from fields that remain To be confirmed for the project.
RELATED SOURCING PATHS
Compare Products and Plan Your Project
Review related product formats, then compare material, set configuration, logo, packaging, testing scope and order quantity with our B2B team.
