Description
B2B SOURCE-CONTROLLED CONCEPT
Flat-Stack Silicone Camping Meal Set with Roll-Top Pouch
This collapsible silicone camping meal set combines a rectangular lunch box, round bowl, travel cup, three-piece cutlery sleeve and roll-top pouch. The two source listings support candidate dimensions for separate collapsible components; the complete system, pouch and illustrated fit remain a new development concept.
- Lunch-box candidates
- Four source-listed size envelopes
- Cup candidate
- 350 ml, source-listed
- Cup dimensions
- 92 × 90 mm open; 40 × 90 mm folded
- Set configuration
- One-person concept
- Cutlery
- Fork, spoon and table knife concept
- Complete packed size
- To be confirmed for the project
PRODUCT PARAMETER
Collapsible Silicone Camping Meal Set Specification Record
Two supplier listings were accessed on October 23, 2026. The table records only their explicit candidate values and keeps every cross-component decision separate. Commercial terms, delivery statements, compliance claims and performance claims are excluded.
| Field | Source-listed candidate | Project approval evidence |
|---|---|---|
| Concept architecture | Lunch box + bowl + cup + cutlery sleeve + roll-top pouch | Approved component bill and pack-out drawing |
| Lunch-box material description | Silicone | Finished-article declaration covering body, rim, lid, pigments and additives |
| Lunch-box size XS | 13 × 9.5 × 6.5 cm | Confirm whether dimensions describe the open body and define measurement points |
| Lunch-box size S | 16.3 × 11 × 6.5 cm | Controlled drawing and measured production-intent sample |
| Lunch-box size M | 18.5 × 12.5 × 6.5 cm | Controlled drawing and measured production-intent sample |
| Lunch-box size L | 22 × 14 × 7.5 cm | Controlled drawing and measured production-intent sample |
| Lunch-box reference weights | 98 / 138 / 188 / 258 g | Map each weight to the approved size and define included parts |
| Cup material description | Silicone body + PP lid | Separate evidence for body, rigid ring, lid, pigments and decoration |
| Cup capacity | 350 ml | Define usable or brimful method, then measure the selected sample |
| Cup size, open / folded | 92 × 90 mm / 40 × 90 mm | Confirm orientation and dimensional datums on the selected sample |
| Cup reference weight | 106 g without carton | Verify the exact body/lid configuration and weighing method |
| Bowl, cutlery and pouch dimensions | To be confirmed for the project | Selected component drawings and measured samples |
| Complete packed size and weight | To be confirmed for the project | Approved pack-out sample with all components present |
REFERENCE CONFIGURATIONS
Define Each Layer in the Collapsible Silicone Camping Meal Set
Choose a lunch-box envelope first, then reserve the flat package area for the bowl, cup and cutlery sleeve. Compare a rigid vertical nesting alternative in the nested PP camping meal kit, review the camping dinnerware collection, or use the base-set add-on decision guide before freezing the bill.
Lunch-box envelope
Pick one source-listed size only after defining open and collapsed measurements. The lid and rigid rim must be counted as separate controlled parts.
Bowl layer
The bowl in the concept has no source-backed dimensions. Its rim diameter, folded height and food-contact material remain project inputs.
Cup candidate
The 350 ml listing supplies open and folded dimensions, but it does not establish fit with the selected lunch box or pouch.
Cutlery and pouch
Approve utensil length, edge protection, sleeve wash access, pouch closure and the sequence used to prevent rim distortion.
DEVELOPMENT CONTROL
Approve the Flat-Stack System in Four Steps
Treat the collapsible silicone camping meal set as one controlled assembly rather than a group of independently selected pieces.
- 01
Select exact source articles
Record the lunch-box size, cup model and every body, lid, ring, utensil and textile part on one controlled bill.
- 02
Define open and folded measurements
State datums, measurement tools, sample condition and whether lids are installed for every dimension and weight.
- 03
Run a physical pack-out review
Observe fold sequence, rim contact, lid interference, utensil protection, pouch closure and recovery after unpacking.
- 04
Release one matched specification
Approve material evidence, colors, decoration, packaging, inspection fields and revision control before quotation.
MATERIAL AND COMPLIANCE BOUNDARY
“Silicone” Does Not Approve the Finished Meal Set
The source descriptions identify silicone and, for the cup, a PP lid. Those names alone do not verify formulation, pigments, fillers, rigid rings, adhesives, printing, intended food, temperature conditions or cleaning method. Link evidence to every selected finished component, color and destination market.
For United States projects, consult the FDA Inventory of Food Contact Substances Listed in 21 CFR. For European Union projects, review Regulation (EC) No 1935/2004 and the European Commission food-contact materials overview. No microwave, dishwasher, freezer, leak, hot-fill, folding-cycle or direct-heat performance is claimed.
PROCUREMENT FAQ
Questions About the Collapsible Silicone Camping Meal Set
Do the source listings describe one complete set?
No. They describe separate collapsible lunch-box and cup candidates. The complete meal-set architecture is a development concept that requires an approved component bill and pack-out sample.
Which lunch-box size should a buyer use?
Choose only after confirming the required meal volume, open/folded measurement method and pouch envelope. The four source-listed dimensions are candidates, not a recommendation.
Is the cup definitely compatible with the lunch box?
No. The listings come from different suppliers and do not prove shared geometry or material matching. Compatibility to be confirmed by project sample and drawing.
Are the bowl and pouch dimensions available?
To be confirmed for the project. They require selected component drawings and measured production-intent samples.
Does collapsible mean leakproof or microwave safe?
No. Folding geometry does not prove seal or temperature performance. Any permitted claim needs an intended-use definition and evidence for the exact finished article.
Is this cookware?
No. This page concerns dinnerware and food-container components for serving, eating and carrying. It makes no stove, flame or direct-heat claim.
VERIFY THE FOLDED ENVELOPE BEFORE QUOTATION
Request a Collapsible Silicone Camping Meal Set Review
Send the selected lunch-box size, cup article, bowl requirement, cutlery profile, folded-envelope limit, colors, artwork, packaging and evidence scope. Naike Dinner will separate source-backed inputs from items that remain To be confirmed for the project.
RELATED SOURCING PATHS
Compare Products and Plan Your Project
Review related product formats, then compare material, set configuration, logo, packaging, testing scope and order quantity with our B2B team.
